Avanish Kumar Chandan

Employment

• National Metallurgical Laboratory Senior Scientist
  2021 - Present
• National Metallurgical Laboratory Scientist
  2017 - 2021
• National Metallurgical Laboratory Trainee Scientist
  2014 - 2016

Education

• Academy of Scientific and Innovative Research Ph.D.
  ? - 2023

Projects & Funding

Projects & funding information is unavailable.

Publications (32)

• High-pressure torsion of face-centered cubic multi-principal element alloys: Nanostructuring and its influence on properties
  Progress in Materials Science 2026 DOI: 10.1016/j.pmatsci.2025.101620
  +Save
• Strain rate dependent deformation behavior evolution and ensuing tensile properties of a medium manganese steel
  Materials Science and Engineering: A 2026 DOI: 10.1016/j.msea.2026.150587
  +Save
• Discerning the degradation and failure mechanism of T91 grade reheater tube through integrated experimental and simulation approach
  Engineering Failure Analysis 2025 DOI: 10.1016/j.engfailanal.2025.109621
  +Save
• Non-monotonic plasticity and hardness evolution of an additively manufactured 316L stainless steel at very high shear strains
  Materials Science and Engineering: A 2025 DOI: 10.1016/j.msea.2025.148354
  +Save
• Lattice distortion in nanocrystalline Fe powder studied by positron annihilation and X-ray diffraction
  Philosophical Magazine 2025 DOI: 10.1080/14786435.2024.2434672
  +Save
• Simultaneous Improvement in Load-Bearing Capacity and Energy Absorption of Resistance Spot-Welded Medium Mn Steel: An Integrated Simulation and Experimental Approach
  Metallurgical and Materials Transactions A 2025 DOI: 10.1007/s11661-025-07748-x
  +Save
• Root Cause Analysis for the Failure of an Air Compressor Impeller
  Transactions of the Indian Institute of Metals 2025 DOI: 10.1007/s12666-024-03534-2
  +Save
• Unraveling the role of subcritical annealing time before intercritical annealing of a cold-worked Ni-Cr-Mo-V alloy steel: Phase transformations and mechanical properties
  Journal of Alloys and Compounds 2025 DOI: 10.1016/j.jallcom.2024.178305
  +Save
• Optimizing Microstructure and Mechanical Properties of Cold-Rolled Medium-Mn Steel Through Intercritical Annealing and Warm Rolling
  JOM 2024 DOI: 10.1007/s11837-024-06854-2
  +Save
• Evading the strength-ductility compromise in medium manganese steel by a novel low temperature warm rolling treatment
  Materials Characterization 2023 DOI: 10.1016/j.matchar.2023.113445
  +Save